102-KIT Contents Check List

(Back to "Assembly Instructions")




Verify that the following items have been included in your 102-KIT (Complete kit with all the parts to construct a 102 Minimum Theremin)

Printed Circuit Board Components

Description

Quantity

Check

Unpopulated Printed Circuit Board (PCB)

1

0.047 Microfarad Capacitor (C1, C3, C4, C6)

4

100 Picofarad Capacitor (C2, C12)

2

10 Microfarad Capacitor (C5, C7, C8, C9, C10, C11, C13, C14)

8

3.3 Nanofarad Capacitor (C15)

1

1N4004 Rectifier (CR1)

1

Selected Value ±1% Resistor (R1)1

150,000 Ohm ±1% Resistor (R2, R4, R9)

3

15,000 Ohm ±1% Resistor (R3)

1

2,200 Ohm ±5% Resistor (R5)

1

6,800 Ohm ±5% Resistor (R6)

1

10,000 Ohm Resistor (R7)

1

22,000 Ohm Resistor (R8)

1

12,700 Ohm ±1% Resistor Ohm Resistor (R10)

1

27,000 Ohm ±5% Ohm Resistor (R11, R12, R13) 3

Pitch Zero Trimmer Potentiometer, 5,000 Ohm (RV1)

1

CD4001BE Integrated Circuit (U1, U2)

2

NJM2113D Integrated Circuit (U3)

1

LP2950ACZ-5.0 Integrated Circuit (VR1)

1

Hookup Wire

4 Feet

Battery Connector

1

Off-Board Components

Description

Quantity

Check

9V Battery

1

Loudspeaker

1

VOLUME Control, 10,000 Ohm, Audio Taper
Marked "A10K"
Includes: 1 Nut, 2 Washers, 1 Knob, 1 Hex Key

1

PITCH Control, 1,000 Ohm , Linear Taper
Marked "B1K"
Includes: 1 Nut, 2 Washers, 1 Knob, 1 Hex Key

1

POWER Switch
Includes: 2 Nuts, 1 Lockwasher, 1 Anti-Rotation Washer

1

OUTPUT Jack
Includes: 1 Nut, 1 Flat Washer,
1 Inside-Tooth Lockwasher

1

Antenna Jack
Includes: 1 Nut

1

GND Jack
Includes: 1 Nut, 1 Solder Lug,
1
Inside-Tooth Lockwasher

1

Enclosure and Hardware

Description

Quantity

Check

Case

1

Front Panel

1

#4-40 x 1.5" Hex Standoff

4

Antenna Jack Bracket

1

Battery Holder

1

#4-40 x 0.312" Pan-Head Screw

10

#6-32 x 0.375" Pan-Head Screw

4

#4-40 x 0.375" Flat-Head Screw

4

#6 Heavy-Duty Lockwasher

4

#6-32 Hex Nut

4



Antenna Assembly

Description

Quantity

Check

Antenna Plate, 6" x 6"

1

Threaded Mast Rod, #6-32 x 6"

1

Banana Plug

1

#6 Flat Washer

2

#6 Split-Ring Lockwasher

1

#6 Inside-Tooth Lockwasher1

#6-32 Hex Nut

3

Text, images, and format ©2013 by Harrison Instruments, Incorporated. No part of this page may be reproduced without express written consent of the copyright holder.
The 102 Minimum Theremin design is used by licensed agreement with its owner. Specifications may change without notice.

The purchase of these products from Harrison Instruments or a third party does not convey a license to the buyer.

20161216