206E Pitch Theremin
View Rear Panel
Pitch Theremin incorporates on our high-quality 206
Pitch Theremin Printed Circuit Assembly.
This theremin is housed in a compact, rugged ABS enclosure, and
equipped with a threaded
adapter for attachment to a microphone stand. A plug-in telescoping
antenna that extends to a height of 20 inches quickly collapses and
unplugs for transport. An internal alkaline
9V battery (included) is accessible by removal of the four bottom cover
screws, and provides a service life in excess of 100 hours. The 206E's
compact overall dimensions, just 2.9" X 3.9"
detached), is unprecedented for convenience, allowing easy
storage and quick setup. Its extended ZERO
range also accommodates our standard 6" square
plate antennas, and permits correct hand sensing in a variety of
* Equipped with 5/8"-27 standard female-thread coupler for attachment to straight mic stands
* Operation from internal 9 Volt battery
* Low current consumption for long battery life
* High-fidelity, pleasing sine-like output tone with exceptionally low noise, wide pitch range, and good sensing linearity
* 1/4" mono line output for user-supplied external amplification through either amps or boards
* Stable, low-drift operation
* Easy pitch ZERO calibration
with one knob
* Convenient VOLUME knob
* Useful sensing range with supplied telescoping antenna, also adaptable to plate antennas for extended sensing range
|Overall Dimensions||2.9" x 3.9" x 6"
(7.37cm x 9.91cm x 15.24cm)
|Antenna length (extended)||20.5" ±0.25"
(52.07 ± 0.64cm)
|Weight (with battery and telescoping antenna)||13 ounces
|Operating Temperature Range||+30°F to +90°F
(-1.1°C to +32.2°C)
|Storage Temperature Range||-10°F to +120°F
(-23.3°C to +48.8°C)
|Power Source||Internal 9V Alkaline Battery|
|Operating Current (maximum)
|Line Output Amplitude
||1 volt, P-P|
||1/4" Mono Jack
|Roll-Up Frequency (-3dB)||60 hertz|
|Roll-Off Frequency (-3dB)||1550 hertz|
|Pitch Response to Hand Position
(with telescoping antenna)
|Line Output Impedance, (volume at 50%)||5,000 ohms|
|Line Output Noise at Zero Beat
(bandwidth = 20Hz to 20kHz)
|2 millivolts, P-P
|Line Output Signal to Noise Ratio||48 dB|
|Local Oscillator Frequency
||455 ±2 kilohertz
|Total Recommended Antenna Capacitance (typical)||10 picofarads|
206E Pitch Theremin
Two Year Limited Parts Warranty and Limitation of Liability
Harrison Instruments Corporation ("Harrison Instruments") warrants this product to be free from defects in materials and workmanship for a period of two (2) years from date of purchase, PROVIDED, however, that this limited warranty is extended only to the original purchaser and is subject to the following conditions, exclusions and limitations hereinafter set forth:
This limited warranty shall be void and of no effect, if:
In the event of a defect in material or workmanship covered by this limited warranty, Harrison Instruments will repair the defect in material or workmanship without charge or replace the product, at Harrison Instruments' option, provided however, that in any case, all costs of shipping for the purpose of shipping the product to Harrison Instruments for repair are paid by you, the purchaser.
THE WARRANTY REGISTRATION CARD SHOULD BE ACCURATELY COMPLETED AND MAILED TO AND RECEIVED BY HARRISON INSTRUMENTS WITHIN FOURTEEN (14) DAYS FROM THE DATE YOU RECEIVE THE PRODUCT.
In order to obtain service under this warranty, you must:
If the defect can be remedied under this limited warranty and other terms and conditions expressed herein have been complied with, Harrison Instruments will provide the necessary warranty service to repair or replace the product and will return it to you, the purchaser.
Limitation of Liability
Harrison Instruments' liability to the purchaser from any cause whatsoever and regardless of the form of action, including negligence, is limited to the the amount of the original purchase price of the product that caused the damage or that is the subject of, or directly related to, the cause of action.
Harrison Instruments does not assume liability for personal injury or property damage arising out of, or caused by, any or all alterations or attachments to its products, nor does Harrison Instruments assume any responsibility for damage to interconnected non-Harrison Instruments products that may result from the normal functioning and maintenance of Harrison Instruments products.
UNDER NO CIRCUMSTANCES WILL HARRISON INSTRUMENTS BE LIABLE FOR ANY LOST PROFITS, LOST SAVINGS OR COLLATERAL, ANY INCIDENTAL DAMAGES, OR ANY CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE ITS PRODUCTS, EVEN IF HARRISON INSTRUMENTS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
THIS LIMITED WARRANTY IS IN LIEU OF ANY AND ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR USE.
Contact Harrison Instruments
Harrison Instruments, Incorporated
Post Office Box 9012
Silver Spring, Maryland 20916
(Back to Harrison Instruments' Main Page)